轨腰仿生自分层防腐梯度涂料合成及影响因素和结构探究

目的仿荷藕结构及功能,制备一种自分层防腐涂料。方法合成聚氨酯改性环氧树脂(PU/EP)及氟硅改性丙烯酸树脂(氟硅改性PAA),将两种树脂共混形成自分层涂料。通过铅笔硬度测试、机械性能测试、接触角测试、耐老化测试、划格法附着力测试、电化学阻抗测试等,分别评价两种树脂比例、混合溶剂比例对涂膜自分层行为及性能的影响,并通过SEM-EDS、红外光谱等表征技术分析涂膜分层后的结构。结果当PU/EP∶氟硅改性PAA=1∶1时,接触角达到96.0°,柔韧性为0.5 mm,耐冲击为50 cm,附着力等级为1,失光率降至19%;乙酸丁酯(NBAC)∶正丁醇(NBA)=4∶6时,涂膜分层情况良好,接触角达到107.7°,浸泡水中48 h耐水性无变化,失光率降至17%。SEM-EDS、红外光谱分析表明,自分层涂膜上层为氟硅改性PAA、底层为PU/EP,中间存在过渡涂层,过渡层两种树脂中的─COOH、─OH、环氧基发生反应,使整个涂层更具稳定性。经由EIS分析,在3.5%NaCl溶液中浸泡40天后,腐蚀介质没有渗透涂膜到达基底金属界面。结论制备的轨腰仿生自分层涂膜的机械性能、附着力、疏水性、耐老化、防腐蚀性能优异,涂膜结构稳定。     

超疏水表面在金属防护中应用的研究进展

超疏水表面由于具有独特的微纳米粗糙结构和低表面能性质,能形成空气垫物理屏障层,减小材料表面与水或其他腐蚀介质之间的接触面积,因此被广泛应用于金属的腐蚀防护。首先简单介绍了超疏水表面的相关理论,主要包括Young氏方程、Wenzel模型和Cassie-Baxter模型。然后,归纳总结了三种制备超疏水表面的有效途径:在低表面能物质上构建微纳米级粗糙结构;先构建出具有微纳米级的粗糙结构,再对表面进行低表面能修饰;一步法完成低表面能修饰和微纳米级粗糙结构的构建。在此基础上,详细地综述了常见的超疏水表面(薄膜或涂层)在金属防护中的应用。进一步介绍了通过在超疏水体系中引入缓蚀剂的方式,构建具有主动防护功能的超疏水表面,并介绍了此种超疏水表面在金属防护中的应用。最后指出了目前的超疏水表面在制备工艺以及耐久性等方面存在的问题,并对其在金属防护领域的应用前景和发展方向作出了展望。     

隧道衬砌栈桥模型重构及车-栈桥系统共振分析

针对隧道衬砌栈桥结构,以栈桥主体构架的轻量化为研究目标,通过中心组合试验设计方法获取设计点,建立多目标数值模型,采用多目标遗传算法计算数值模型的最优解。以最优解的设计参数为重构模型的尺寸参数,对重构模型进行仿真检验和车-栈桥系统共振分析,分析结果表明:栈桥结构受总承载65t时,重构模型相比原模型,最大变形增大了8mm,最大应力增大了32.4MPa,质量下降了13.86%,充分利用了强度、刚度盈余以达到轻量化的目的,且车辆运行速度避开了影响共振的危险速度。     

Preparation of molecularly imprinted fluorescence sensor based on carbon quantum dots via precipitation polymerization for fluorescence detection of tetracycline

A facile and effective method was proposed to prepare the molecularly imprinted fluorescence sensor with carbon quantum dots, which were modified vinyl groups by acrylic acid on the surface. The obtained fluorescence composite material was investigated by transmission electron microscope and Fourier transform infrared spectra. After the experimental conditions were optimized, a linear range of 1.0–60 μmol L⁻¹ was obtained and the detection limit was 0.17 μmol L⁻¹. The novel fluorescence sensor can be successfully used to detect tetracycline in real samples. This study provides a convenient strategy for selective recognition and rapid detection of tetracycline in the complex environment.     

镍基高温合金锥筒形件拉深旋压成形机理研究

针对镍基高温合金因加工硬化严重成形时极易产生破裂和起皱等典型缺陷的问题,以锥筒形壳体类零件为对象,提出了一种由锥形预制坯经过真空固溶处理后拉深旋压成形锥筒形件的方法,并对其成形机理进行了研究。基于Abaqus/Explicit平台,建立了锥筒形件拉深旋压有限元模型,分析了成形过程中的瞬态等效应力、等效塑性应变、切向应力、壁厚及三向应变分布规律。结果表明:在旋压成形过程中,最大瞬态等效应力位于旋轮接触区及附近区域、最大瞬态等效塑性应变位于坯料口部;瞬态切向压应力最大值位于旋轮接触区,而瞬态切向拉应力最大值位于旋轮接触区附近的两侧区域。筒形段中部壁厚减薄,而坯料口部壁厚增厚。旋压成形试验表明,锥形预制坯经拉深旋压后可获得壁厚均匀的锥筒形件。     

基于深度卷积神经网络的视觉里程计研究

视觉里程计利用视频信息来估计相机运动的位姿参数，实现对智能体的定位。传统视觉里程计方法需要特征提取、特征匹配/跟踪、外点剔除、运动估计、优化等流程，解算非常复杂，因此，提出了基于卷积神经网络的方法来实现端对端的单目视觉里程计。借助卷积神经网络对彩色图片自动学习提取图像帧间变化的全局特征，将用于分类的卷积神经网络转化为帧间时序特征网络，通过三层全连接层输出相机的帧间相对位姿参数。在KITTI数据集上的实验结果表明，提出的Deep-CNN-VO模型可以较准确地估计车辆的运动轨迹，证明了方法的可行性。在简化了复杂模型的基础上，与传统的视觉里程计系统相比，该模型的精度也有所提高。     

DP980+Z烘烤硬化值与退火温度的关系

摘要：为了研究退火温度对镀锌DP980+Z烘烤硬化值的影响，退火温度控制在760～820℃之间，系统分析退火温度对烘烤硬化值的影响。通过准静态拉伸试验机测量烘烤硬化值及抗拉强度，采用lepara试剂对组织中的马氏体进行着色，利用金相显微镜及图像处理软件测量马氏体的体积分数；采用扫描电镜观察DP980+Z的双相组织特点，并且将组织图片通过CAD转化成有限元图进行网格划分，建立代表性体积单元（RVE），通过有限元分析铁素体、马氏体强度对烘烤硬化值的影响。在同样的变形量情况下，DP980+Z的原始屈服强度越高，烘烤硬化值越高。     

Predicting visual similarity between colour palettes

This work is concerned with the prediction of visual colour difference between pairs of palettes. In this study, the palettes contained five colours arranged in a horizontal row. A total of 95 pairs of palettes were rated for visual difference by 20 participants. The colour difference between the palettes was predicted using two algorithms, each based on one of six colour-difference formulae. The best performance (r² = 0.86 and STRESS = 16.9) was obtained using the minimum colour-difference algorithm (MICDM) using the CIEDE2000 equation with a lightness weighing of 2. There was some evidence that the order (or arrangement) of the colours in the palettes was a factor affecting the visual colour differences although the MICDM algorithm does not take order into account. Application of this algorithm is intended for digital design workflows where colour palettes are generated automatically using machine learning and for comparing palettes obtained from psychophysical studies to explore, for example, the effect of culture, age, or gender on colour associations.     

A dense and compact laser cladding layer with solid metallurgical bonding significantly improved corrosion resistance of Mg alloy for engineering applications

Although Mg alloy attracts great attention for engineering applications because of high specific strength and low density, low corrosion resistance limits its extensive use. In this study, Mg–Al–Zn–Mn alloy was treated via a laser cladding process to generate a dense and compact laser cladding layer with solid metallurgical bonding on the substrate for improving corrosion resistance, effectively hindering the corrosion pervasion into Mg alloy. The corrosion current density declined from 103 μA/cm² for Mg alloy to 13 μA/cm² for the laser cladding layer in NaCl aqueous solution. Moreover, the laser cladding layer was slightly corroded in comparison with Mg alloy in NaCl aqueous solution. Besides, the microhardness of the cladding layer reached a mean value of 170.5 HV, 3.1 times of Mg alloy (56.8 HV) due to the in situ formation of hardening intermetallic phases. Wear resistance of laser cladding layer was also obviously improved. These results demonstrated that the laser cladding layer obviously enhanced anticorrosion property of Mg alloy for engineering applications.     

强织构铝合金残余应力检测技术研究

在铝合金轧板的残余应力研究中，由于其强烈的轧制织构，无法使用常规的X射线sin2 ψ法进行残余应力分析。以2A97铝锂合金轧制板材为研究对象，使用X射线衍射法测量材料的取向分布函数，结合Ruess、Voigt、Neerfeld-Hill模型，从理论上计算不同假设条件下材料的宏观弹性常数，得到材料表面的宏观残余应力。实验结合盲孔法进行对比验证，结果表明Neerfeld-Hill模型的残余应力分析结果与盲孔法所测结果相互吻合，建立织构材料的宏观残余应力分析方法。